Compact lifting.
Engineered for efficiency.
Dhiraj Cranes Single Girder EOT Cranes are precision-engineered overhead lifting systems for light to medium-duty industrial material handling. With a compact structure, efficient electric operation and configurable designs, they are suited to workshops, warehouses, fabrication units and manufacturing facilities.
A practical overhead crane architecture for efficient material handling.
The current Dhiraj product specification describes Single Girder EOT Cranes from 0.5 T to 20 T with operational spans up to 30 m. The design focuses on compact construction, smooth electric operation, lower structural weight and economical ownership.
Lightweight structure. Serious industrial utility.
A single main girder is supported by end carriages while an electric hoist travels along the girder. This arrangement provides an efficient overhead lifting solution where moderate loads, space optimization and cost efficiency are important.
Single-girder construction reduces structural weight and helps optimize available workspace.
Lower structural and installation requirements can support economical project execution.
Electric hoisting supports controlled lifting and smooth movement for regular industrial handling.
The compact arrangement can be configured around the facility layout and operating requirement.
Optimized construction and fewer components can help reduce downtime and maintenance effort.
Capacity, span and control arrangements can be tailored to the intended application.
How a Single Girder EOT Crane is arranged.
The visual below is a clean engineering-style representation of the single-girder arrangement: one main bridge girder, end carriages, travelling hoist and hook assembly.
The primary bridge girder carries the trolley and hoisting arrangement across the crane span.
The electric hoist travels along the girder to lift and position loads within the operating area.
Motorized end carriages support bridge travel along the runway arrangement.
Pendant, remote or cabin operation can be selected according to the stated project requirement.
Two common Single Girder EOT arrangements.
The existing product page identifies Top Running and Under Slung configurations for different building and headroom conditions.
Top Running Single Girder
Operates on rails mounted on runway beams. This arrangement is intended to provide floor clearance and efficient overhead operation where a conventional runway system is available.
Under Slung Single Girder
Suspended from the building structure and suited to facilities where headroom or structural conditions make a conventional top-running arrangement less suitable.
Application-Based Selection
Selection can be considered around load, span, building layout, headroom and operating requirements rather than using one configuration for every facility.
Designed around everyday industrial material movement.
Based on the current Dhiraj product page, Single Girder EOT Cranes are used across workshops, warehouses, manufacturing, fabrication, engineering, logistics and maintenance environments.
Industrial Workshops
Handling raw materials, machine components, tools and semi-finished goods where moderate lifting is part of everyday work.
Warehouses
Loading, unloading and internal movement of moderate-weight industrial goods with smooth hoist travel.
Manufacturing Units
Movement of components and equipment across production and assembly environments.
Fabrication Shops
Positioning metal sheets, fabricated structures and machinery parts with controlled electric lifting.
Engineering Industries
A compact lifting system for small and medium engineering facilities requiring economical material handling.
Logistics & Distribution
Efficient movement of packaged goods and industrial materials through distribution and handling areas.
Maintenance Units
Lifting motors, pumps and equipment during installation, servicing and maintenance activities.
Assembly Areas
Overhead handling for equipment and components where floor space and smooth positioning matter.
General Material Handling
Flexible overhead movement for facilities with frequent but moderate lifting requirements.
Add your real crane views below the interactive model.
Replace the five placeholder image URLs with your final product photographs or renders. Clicking any thumbnail opens a larger view without affecting the 3D model.
Configuration details at a glance.
These values follow the current Single Girder EOT Crane product page and should be used as the page's baseline specifications.
Choose the crane architecture around the requirement.
The existing Dhiraj product page gives the following high-level comparison between Single Girder and Double Girder EOT systems.
From requirement to a working crane system.
A structured project flow helps align the crane configuration with the facility, load-handling requirement and operating environment.
Application Study
Review load, span, lifting height, building arrangement, duty requirement and operating conditions.
Configuration & Design
Develop the crane arrangement around the required capacity, span, hoist, controls and safety requirements.
Manufacturing & Quality
Fabrication and quality checks are carried out around the defined engineering and project requirements.
Installation & Support
Installation, commissioning and after-sales support complete the project delivery cycle.
Why the Single Girder architecture works well for moderate-duty handling.
Compact structural arrangement
A single bridge girder provides a lighter overhead architecture than a double-girder arrangement. This makes it relevant to facilities where structural weight, available space and economical installation are important considerations.
Space optimization
The product page specifically positions the crane around headroom optimization, lower structural load and budget efficiency. The final configuration should therefore be selected against the actual building geometry and lifting requirement.
Controlled electric lifting
An electric hoist travels along the girder and provides the primary lifting movement. Bridge travel and trolley/hoist operation can be configured around the stated operating arrangement.
Top Running or Under Slung
The two configurations allow the system to be considered around runway arrangement and available headroom. Top Running operates on runway rails, while Under Slung is suspended from the building structure.
Economical ownership
The current product description emphasizes economical operation, lower maintenance requirements and energy-efficient electric movement. These characteristics can be useful where frequent moderate-duty lifting is required.
Application-led customization
Dhiraj's current page states that capacity, span, control systems and other configurations can be tailored to the application, workspace dimensions and load-handling requirement.
Designed for dependable day-to-day operation.
The product page describes the crane as low-maintenance and high-reliability. Actual inspection and maintenance schedules should follow the final crane design, duty and applicable requirements.
Routine Inspection
Keep regular checks around the hoisting system, bridge, end carriages, wheels, electrical components and controls.
Hoist & Hook Checks
Inspect the hoisting arrangement and hook assembly according to the crane's operating and maintenance requirements.
Electrical System
Review control-panel condition, electrical connections, protective devices and operating controls during scheduled maintenance.
Runway & Travel
Monitor travel components and runway conditions to support smooth bridge movement and reliable operation.
Preventive Maintenance
Planned servicing can help identify wear before it becomes an operational problem and can support equipment availability.
After-Sales Support
Dhiraj's current product page highlights installation, commissioning and after-sales service with spare-parts support.
Manufactured in India. Supplied across multiple markets.
The current product page lists presence across Sidkul Haridwar, Baddi, Delhi, Manesar, Nepal, Africa, Oman, UAE, Dubai and India.
Domestic Industrial Supply
Single Girder EOT systems for workshops, warehouses, factories, fabrication and engineering environments.
International Supply
Dhiraj's product page states that its cranes are supplied across domestic and international markets with installation and after-sales support.
Project Assistance
Configuration, installation, commissioning and after-sales support are positioned as part of the overall offering.
Single Girder EOT Crane FAQs.
What is a Single Girder EOT Crane?
A Single Girder EOT Crane is an Electric Overhead Traveling Crane with one main girder supported by end carriages. An electric hoist travels along the girder to lift and move loads.
What capacity and span are available?
The current Dhiraj product page states lifting capacities from 0.5 T to 20 T and operational spans up to 30 meters.
Where are Single Girder EOT Cranes used?
The page lists industrial workshops, warehouses, manufacturing units, fabrication shops, small engineering industries, logistics and distribution centers, maintenance and assembly units.
What are the key features?
Compact construction, cost-effective operation, energy-efficient electric hoisting, easier installation, low maintenance and customizable configurations are listed as key features.
What is Top Running?
Top Running Single Girder EOT Cranes operate on rails mounted on runway beams and are described as providing floor clearance and operational efficiency.
What is an Under Slung Single Girder EOT Crane?
Under Slung cranes are suspended from the building roof structure and are intended for facilities with limited headroom or structural constraints.
Can the crane be customized?
Yes. The current page states that configurations can be tailored around capacity, span, control systems, load, building layout and application requirements.
Why is a Single Girder EOT Crane economical?
The page attributes cost efficiency to the lightweight design, reduced steel usage and lower power consumption compared with double girder systems.
What operating controls are available?
The specification lists Pendant / Remote / Cabin Operated as the operation type.
Does Dhiraj provide installation and after-sales support?
The current product page highlights complete installation and after-sales support, including on-site installation and commissioning and spare-parts support.
Planning a Single Girder EOT Crane?
Share your required capacity, span, lifting height, building layout and application. Dhiraj Cranes can help define a suitable crane configuration for your material-handling requirement.